预处理的铜绿假单胞菌对Cu2+的生物吸附研究

从电镀废水污泥中分离，纯化获一高抗铜菌株，经鉴定为铜绿假单胞菌（Pseudomonas aeruginosa)，采用不同浓度盐酸对铜绿假单胞菌进行预处理，同时考察了不同因素如溶液的pH，温度，摇床转速，接触反应时间对未处理菌和预处理的影响，结果表明，经0．1NHCl预处理的菌体具有最佳吸附效果，pH、摇床转速对菌体的吸附具有较显著影响，温度对菌体吸附影响不大。     

游离附生假单胞菌对铜绿微囊蓝细菌中32P释放的影响

采用同位素示踪法，分析游离附生假单胞菌(Pseudomonas sp-)对富集^32P的铜绿微囊蓝细菌(Microcystis aeruginosa)中磷释放的影响．研究结果表明：在微囊蓝细菌生长的延迟期和对数期．游离附生假单胞菌的加入抑制了微囊蓝细菌中^32P的释放，而对蓝细菌的生长没有明显的影响；在微囊蓝细菌生长的稳定期和衰减期，假单胞菌促进其蓝细菌细胞内^32P的释放，同时也加速微囊蓝细菌的衰亡．假单胞菌对微囊蓝细菌^32P释放的促进作用是由于自身的吸磷能力导致的．假单胞菌的吸磷量由假单胞菌生物量和细胞内磷浓度决定，假单胞菌在微囊蓝细菌的整个生长阶段生物量不断增加，而体内^32P浓度在开始阶段很低．直到微囊蓝细菌进入稳定期才达到相对稳定。     

阳离子型聚合物对低温低浊水的絮凝效果与形态学特性

采用微絮凝-深床直接过滤工艺,以西安市曲江水厂低温低浊水质为原水(水温低于10 ℃,初始浊度低于10NTU),投加阳离子型聚合物(简称CP)作主混凝剂或助凝剂,借助分形数学理论与图像分析技术,对滤料粒径、原水浊度、原水温度、药剂种类、聚合物分子量及投加量、混合强度等因素对处理效果的影响进行了研究,分析探讨了不同药剂处理低温低浊水的作用机理、絮凝形态学特征以及絮体结构的分形特性.结果表明,①当温度低于4 ℃、初始浊度小于4NTU时,不宜单独采用Al2(SO4)3或PAC作为絮凝剂;当温度为4～10 ℃、初始浊度小于10NTU时,如果只投加Al2(SO4)3或PAC作为絮凝剂,宜用细砂滤料过滤;低温低浊条件下,无机混凝剂形成的絮体粒径小、结构松散脆弱、有效质量密度低、沉速慢,但表征絮体分形特性的分维值较高.②CP作絮凝剂能显著改善低温低浊水的絮凝效果与过滤性能,但混合强度需增大,宜用粗砂滤料过滤;③单独用CP作絮凝剂时,宜投加分子量较低的弱阳性聚合物或投加低剂量较高分子量的强阳性聚合物;CP用作助凝剂时,能显著减少主混凝剂用量,但宜投加强阳性聚合物或增加弱阳性聚合物的剂量.④CP兼备电性中和与吸附架桥絮凝作用,能形成粒径较大、吸附性能与过滤性能良好的网状絮体构型,其有效质量密度高,产生的污泥量少,污泥沉降速度快,脱水效果好,但分维值低.⑤各种水处理药剂的处理效果为:Al2(SO4)3(或PAC) CP＞CP＞PAC＞Al2(SO4)3,这种差别由絮体的形态学特性与构型特征各异引起.     

气浮-生物接触氧化集成技术处理受污染水源水研究

针对受污染水源水,采用气浮-生物接触氧化集成技术进行中试研究,考察各影响因素对污染物去除效果的影响,优化工艺参数和运行条件,并进行了冬季低温运行研究.与现有生化-气浮串联工艺比较,处理受污染原水(NH3-N质量浓度为5～7 mg·L-1),集成装置能取得更好的处理效果,而且具有占地小、能耗低等优点.     

加氢原料缓冲罐串压事故动态模拟研究

通过工艺流程动态模拟,研究某渣油加氢装置在反应进料泵事故紧急停车后,不同工艺设计方案组合条件下,引发高压气体反串到低压原料缓冲罐的事故影响。研究结果表明:泵出口双单向阀和紧急切断阀的设计对降低超压事故的发生有很好的保护作用;切断阀关闭时间越短对原料缓冲罐超压保护越有利;安全阀和缓冲罐的设计条件须与切断阀关闭时间和单向阀数量等设计条件综合考虑。通过动态模拟方法研究工艺操作异常工况,对优化工艺设计,提高本质安全设计有参考价值。     

502清洁生产实践

分析台州市两家502企业清洁生产情况,总结经验和成效,提出进一步清洁生产潜力,促进行业节能降耗减污。     

曝气生物滤池Biostyr处理微污染水源

采用曝气生物滤池Biostyr对浙江省T市某水厂微污染水源水进行生物预处理,现场试验研究表明:在气水比为2∶1,滤速6m/h,水温24～32℃的运行条件下,其对水中各污染物的平均去除率为:高锰酸盐指数24.1%,氨氮81.7%,亚硝酸盐氮79.9%,浊度49.0%。完全能达到生物预处理目的。     

Enterotoxin production and antimicrobial susceptibility in Staphylococci isolated from traditional raw milk cheeses in Serbia

This study was undertaken to determine the prevalence of coagulase positive staphylococci (CPS) by examining a total of 71 raw milk cheeses. Additionally, enterotoxigenicity, antimicrobial susceptibility and the presence of mecA and mecC genes in the staphylococcal isolates were investigated. The isolation and enumeration procedure of CPS followed the International Organization for Standardization (ISO) standard. The presumptive staphylococci were identified by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) using the VITEK MS system. VIDAS® Staph enterotoxin II assay was used for the detection of classical enterotoxins. Antimicrobial susceptibility testing (AST) was accomplished performing the disk diffusion method. All suspected methicillin resistant staphylococci were investigated for the presence of mecA and mecC genes by PCR assay. A high prevalence (87.32%) of CPS was detected in the cheeses at contamination levels up to 5.58 log CFU g^?1. Among 47 staphylococcal isolates screened for enterotoxin production, only one isolate, identified as S. hyicus, was confirmed as being enterotoxigenic. Resistance to penicillin (63.70%) was the most common resistance among the tested Staphylococcus aureus isolates. The dominant phenotypic resistance patterns in coagulase negative staphylococci (CNS) were resistance to ofloxacin and fusidic acid. All CNS isolates were susceptible to the clinically important antibiotics clindamycin, chloramphenicol, gentamicin, linezolid, rifampicin and trimethoprim-sulfamethoxazole. The mecA and mecC genes were not detected. To the best of our knowledge, this is the first study concerning evaluation of the presence of methicillin resistant staphylococci (MRS) in dairy products in Serbia.     

民用燃煤源中多环芳烃排放因子实测及其影响因素研究

民用燃煤是我国目前关注较多的多环芳烃(polycyclic aromatic hydrocarbons,PAHs)排放源.根据我国民用燃煤所涉及的煤种、燃烧方式和炉灶类型,利用全流稀释采样系统对5种不同成熟度的煤种,分别以散块煤和蜂窝煤形式在3种炉灶类型中燃烧产生的烟气进行了采样和分析,初步获取了我国民用燃煤烟气中PAHs排放因子(EFPAHs)的实测数据.结果表明,烟煤的EFPAHs在块煤燃烧方式下的变化范围为1.1～3.9 mg.kg-1,在蜂窝煤燃烧方式下的变化范围为2.5～21.1 mg.kg-1,无烟煤的EFPAHs在块煤与蜂窝煤燃烧方式下分别为0.2 mg.kg-1与0.6 mg.kg-1.在民用燃煤的EFPAHs的各种影响因素中,煤的地质成熟度起主导作用,不同成熟度煤种的EFPAHs差异幅度高达1～2个数量级.其次是燃烧形态(块煤/蜂窝煤),主要表现为同一种地质成熟度的煤在蜂窝煤燃烧方式下排放的PAHs比块煤高2～6倍.炉灶类型的影响最小.     

Characterization of typical taste and odor compounds formed by Microcystis aeruginosa

Production and characteristics of typical taste and odor (T&O) compounds by Microcystis aeruginosa were investigated. A few terpenoid chemicals, including 2-MIB, β-cyclocitral, and β-ionone, and a few sulfur compounds, such as dimethyl sulfide and dimethyl trisulfide, were detected. β-Cyclocitral and β-carotene concentrations were observed to be relevant to the growth phases of Microcystis. During the stable growth phase, 41-865 fg/cell of β-cyclocitral were found in the laboratory culture. β-Cyclocitral concentrations correlated closely with β-carotene concentrations, with the correlation coefficient R2 = 0.96, as it is formed from the cleavage reaction of β-carotene. For dead cell cases, a high concentration of dimethyl trisulfide was detected at 3.48-6.37 fg/cell. Four T&O compounds, including β-cyclocitral, β-ionone, heptanal and dimethyl trisulfide, were tested and found to be able to inhibit and damage Microcystis cells to varying degrees. Among these chemicals, β-cyclocitral has the strongest ability to quickly rupture cells.